Bearings for Vespa





Crankshaft bearing and oil seal kit BGM PRO FKM/Viton® (E10/ethanol resistant) for Vespa 125/150 VM/VN/VL/VB1T/VNA/GS

WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, which are of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If they are installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.
WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by about 0.3 mm. The bearings then run freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the shoulders of the bearings have been custom machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality resistant BGM Pro FKM/Viton® oil seals.
Vespa 125/150 VM/VN/VL/VB1T/VNA/GS

Cuscinetto Sip Premium Albero motore 25X62X12 mm (C4) per Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally

Misure: 25x62x12 mm
High Carbon Chrome Steel
rinforzato, made in Japan, C4
9 sfere
Vespa 125 V30-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Lato volano per Vespa 125 V30-TS 1°/150 VL-Super 1°

Crankshaft bearing flywheel side SIP PREMIUM 25x38x15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa

reinforced
24 rolls, high quality
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE

High-speed Pinasco crankshaft bearing kit for Vespa 125/150 VM-VN-VNA-VNB-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX

Measurements: 25x62x12 mm 2 pieces
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE

SKF crankshaft bearing 25x52x12mm for Vespa 125 V1-15/V30-33/Hoffmann

Dimensions: 20x52x12mm
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T

Seeger ring safety bearing clutch and primary gear pin

Vespa 50 S V5SA1T
Vespa 50 N/L/R V5A1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP

Crankshaft bearing SKF flywheel side 20x47x14 mm (6204 TN9-C3) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 wheel side gear shaft for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°

Dimensions: 20x47x14 mm
Cage in polyamide
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3-PK

NTN crankshaft bearing for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally

Dimensions: 25x62x12 mm, polyamide cage
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE

Needle roller bearing Gear Shaft for Vespa VNA/VNB-150 VBA/VBB

100% Made in Italy
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T>024899
Vespa 125 GT VNL1>2T>60899
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 150 Super VBC1T>70199
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T>73899

Crankshaft bearing SKF clutch side 17x47x14 mm (6303 TN9-C3) for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/Ape 50

Dimensions: 17x47x14 mm
Cage in polyamide
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa 125 PK ETS

Crankshaft bearing SKF flywheel side 20x47x14 mm (6204 TN9-C4) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 gear shaft wheel side for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°

Dimensions: 20x47x14 mm
Cage in polyamide
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T

SKF Roller Bearing Crankshaft (Flywheel Side) for Vespa 125 Primavera VMA1>2T/ET3 VMB1T

Measurements: 20x47x14 mm
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Complete engine overhaul kit for Vespa 125 Primavera ET3

Kit composed of:
Vespa 125 Primavera VMA1>2T
BEARINGS:
- Crankshaft flywheel side 20x47x14 mm 07-BI-009-CI (Roller type brand NBR)
- Crankshaft clutch side 17x47x14 mm 07-BI-001-CI
- Gear shaft 10x30x9 mm 07-BI-015-CI
- Clutch bell 25x47x8 mm 07-BI-005-CI
- Gear shaft (roller type) 16x22x12 mm 07-BI-007-CI
- Rear wheel 20x47x14 mm 07-BI-006-CI
GASKETS:
- 07-BV-003-CI
Vespa 125 Primavera ET3 VMB1T

SKF BB1-0855 crankshaft bearing for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally

Dimensions: 25x62x12 mm
Ref. Orig. 097804
Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally

Crankshaft bearing SKF flywheel side 20x47x14 mm (6204-C3) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 gearshaft wheel side for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°

Measurements: 20x47x14 mm (Flywheel side)
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T

Multiple gear bearing (613963 / C3)d for Vespa 125 GT 1°/3°/GTR/TS/150 GL 2°/150 Sprint 1°/3°/V/P125-150X 1°

Dimensions: 12x40x12 mm ( Damper Bearing )
Ref. Orig .097701
Vespa 125 GT VNL2T> 30742
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T >035095
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T >146313
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
